First three shifter gears not mapped for G29

I'm using the driver on Raspberry Pi (kernel 5.10.17-v7l+) and noticing that three shifter "buttons" aren't mapped. This is a problem because the mapping for OpenJVS needs these event/button names to map. Output of evtest below

Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x46d product 0xc24f version 0x111
Input device name: "Logitech G29 Driving Force Racing Wheel"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 288 (BTN_TRIGGER)
    Event code 289 (BTN_THUMB)
    Event code 290 (BTN_THUMB2)
    Event code 291 (BTN_TOP)
    Event code 292 (BTN_TOP2)
    Event code 293 (BTN_PINKIE)
    Event code 294 (BTN_BASE)
    Event code 295 (BTN_BASE2)
    Event code 296 (BTN_BASE3)
    Event code 297 (BTN_BASE4)
    Event code 298 (BTN_BASE5)
    Event code 299 (BTN_BASE6)
    Event code 300 (?)
    Event code 301 (?)
    Event code 302 (?)
    Event code 303 (BTN_DEAD)
    Event code 704 (BTN_TRIGGER_HAPPY1)
    Event code 705 (BTN_TRIGGER_HAPPY2)
    Event code 706 (BTN_TRIGGER_HAPPY3)
    Event code 707 (BTN_TRIGGER_HAPPY4)
    Event code 708 (BTN_TRIGGER_HAPPY5)
    Event code 709 (BTN_TRIGGER_HAPPY6)
    Event code 710 (BTN_TRIGGER_HAPPY7)
    Event code 711 (BTN_TRIGGER_HAPPY8)
    Event code 712 (BTN_TRIGGER_HAPPY9)
  Event type 3 (EV_ABS)
    Event code 0 (ABS_X)
      Value      0
      Min        0
      Max    65535
    Event code 1 (ABS_Y)
      Value    255
      Min        0
      Max      255
    Event code 2 (ABS_Z)
      Value    255
      Min        0
      Max      255
    Event code 5 (ABS_RZ)
      Value    255
      Min        0
      Max      255
    Event code 16 (ABS_HAT0X)
      Value      0
      Min       -1
      Max        1
    Event code 17 (ABS_HAT0Y)
      Value      0
      Min       -1
      Max        1
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
  Event type 21 (EV_FF)
    Event code 80 (FF_RUMBLE)
    Event code 81 (FF_PERIODIC)
    Event code 82 (FF_CONSTANT)
    Event code 83 (FF_SPRING)
    Event code 84 (FF_FRICTION)
    Event code 85 (FF_DAMPER)
    Event code 87 (FF_RAMP)
    Event code 88 (FF_SQUARE)
    Event code 89 (FF_TRIANGLE)
    Event code 90 (FF_SINE)
    Event code 91 (FF_SAW_UP)
    Event code 92 (FF_SAW_DOWN)
    Event code 96 (FF_GAIN)
    Event code 97 (FF_AUTOCENTER)

berarma / new-lg4ff

First three shifter gears not mapped for G29 #91