search

betaflight / betaflight-configurator

Cross platform configuration tool for the Betaflight firmware
GNU General Public License v3.0
2.57k stars 909 forks source link

beta 10.10.0 firm 4.5.1BTFL Receiver tab SBUS problem #4240

Closed donnyvid closed 2 weeks ago

donnyvid commented 2 weeks ago

Describe the bug

in the receiver tab, the Sbus protocol does not work. previous version worked fine. using radio master receiver ELRS 2.4gh, but set to Sbus not CRSF. when entered under receiver Tab, Serial, and SBUS you get no response from model and no color Screenshot 2024-11-03 224317 Screenshot 2024-11-03 230409 bars or any movement. When receiver is set to CRSF and the receiver tab is set to Serial, and CRSF then model moves just fine and colored bars move appropriately.

To Reproduce

enter into WIFI mode on receiver attached to drone. select sbus protocol. unplug USB cable and re plug USB cable to flight controller. bind radio controller. Enter into betaflight configurator 10.10.0 firm 4.5.1. go to ports tab and select Uart X for receiver and set to serial rx. then go to receiver tab and set receiver to Serial, and Sbus., save.

Expected behavior

expected behavior is for the model to move with respect to the input of the radio controller, but instead, nothing happens and there is no indication of receiving any signal

Configurator version

10.10.0 (c97deaf)

Flight controller configuration

No response

Add any other context about the problem that you think might be relevant here

No response

nerdCopter commented 2 weeks ago

you must add SERIALRX_SBUS as a custom define image

haslinghuis commented 2 weeks ago

Or use SBUS as Radio Protocol