search

betaflight / betaflight-tx-lua-scripts

Collection of scripts to configure Betaflight from your TX (currently only supported in OpenTx)
GNU General Public License v3.0
604 stars 142 forks source link

Raceband 2 +3 not saved #113

Closed derdanu closed 6 years ago

derdanu commented 6 years ago

Setup: Furious FPV Fortini OSD (BF 3.2.4 Furious FPV Stealth (improved Version / new connector) Frsky X9D + opentx 2.2.0 Lua 1.0.1

Changing VTX channels works fine, but only Raceband 2 and 3 were not saved. The Script tries to retry the process but fails again.

Any way to provide a debug log?

Transmitter and LUA combination works well on other Setups.

derdanu commented 6 years ago

Similar like #112 as it uses the protocol, but I run R-XSR as well. BTW tested all firmwares provided by Frsky. The other working Setups don't have an R-XSR receiver.

codecae commented 6 years ago

If you're having issues with the r-xsr, please try using a more recent build of 3.3 from ci.betaflight.tech

derdanu commented 6 years ago

Same issue with 3.3 Build #583 https://ci.betaflight.tech/job/Betaflight/583/

codecae commented 6 years ago

I unfortunately do not have a tramp-based VTX so I have no way of reproducing this issue. Hopefully someone else has one and can chime in.

derdanu commented 6 years ago

@codecae please drop a line at Tech@furiousfpv.com and ask for Tommy Schintgen. Please provide my name in the conversation as I talked with him. Maybe he can send you a Stealth VTX for testing and further development.

Sybalau commented 6 years ago

I have the same isue with Stealth Race VTX. Raceband 2 and 3 don't saved.

codecae commented 6 years ago

@derdanu Thank you for the follow-up! I will reach out now.

codecae commented 6 years ago

@derdanu I have written an email to the suggested address and am awaiting a response. Thanks for your help!

eumelOne commented 6 years ago

I also have observed this issue with a unify pro hv race edition. Only RB2 and RB3 won't be saved...

derdanu commented 6 years ago

@eumelOne I can confirm this. A mate has the same issue with an unify nano. It defintily a R-XSR bug. I have switched on of these Setups to a crossfire nano RX. Saving Channel 3 works like a charm.

Brisingrox commented 6 years ago

I have tested this issue with FortiniF4/FortiniF4osd rev1+rev2 but with the SPD15 Receiver and didn't encounter any issues. Tested with Steahlt Race and Long Range without issues

gregory-gauthier commented 6 years ago

Same issue, I can't save Raceband 2 & 3 VTX : Unify Pro HV Race RX : R-XSR (firmware 171103) FC : LUX V2 & Micro Lux V2 (Betaflight 3.2.5 & 3.3.0)

DoubleQuad commented 6 years ago

I was trying to change to R2 on the weekend for some racing, and was unable to via the Lua script, also. However, was able to change via the PiDFlight Vtx app. VTX: Unify Pro HV Race. RX: R-XSR (unsure of firmware). FC: Lux V1 (BF 3.2.4 I think).

ps915 commented 6 years ago

Same for me.

KISS FC V2 ImmersionRC Tramp

I could change channels to RB3. I replaced it with a TBS Unify and i worked!

dbertschi commented 6 years ago

Same issue for me. Fortini F4, RSXR 171103, Furious Stealth VTX. BF 3.3.0. On the OSD i can change to all RaceBand channels - but with the latest LUA Script on my X7, RB2 and RB3 can't be saved.

SpeedyPizzaDrones commented 6 years ago

Same here running BF 3.2.0, OpenTX 2.2.1, latest lua V1.01, R-xsr, Stealth race. Can save with BT app and via Pidflight vtx

Any solutions?

David-VG commented 6 years ago

Just while solved, try FPORT.

https://github.com/betaflight/betaflight/wiki/The-FrSky-FPort-Protocol

DaEmpty commented 6 years ago

Same for me Kiss FC V1 BF3.3.1 R-XSR (tried all versions) Unify Race

With the normal XSR everythings works fine

gregory-gauthier commented 6 years ago

It works with F-Port protocol

SpeedyPizzaDrones commented 6 years ago

Yes guys, FPORS solved all lua script problems I had

Il giorno mer 18 apr 2018 alle ore 20:22 gregory-gauthier < notifications@github.com> ha scritto:

It works with F-Port protocol

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/betaflight/betaflight-tx-lua-scripts/issues/113#issuecomment-382482593, or mute the thread https://github.com/notifications/unsubscribe-auth/AjcCJSEFLod8AOz5C3r7ch1nS-a8wE12ks5tp4R_gaJpZM4R9en_ .

stale[bot] commented 6 years ago

This issue / pull request has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs within a week.

stale[bot] commented 6 years ago

Automatically closing as inactive.

rustbg commented 6 years ago

Same here. R-XSR firmware 171009 / BF 3.4 stable / OpenTX 2.2.1. R2 and R3 are not saved. Using latest lua script with the dsetpoint fixed. Tried so far: R-XSR on LBT and FCC F-Port (un-inverted) Un-inverted s.port + inverted sbus Inverted s.port on softserial + inverted sbus

FlipFlopRacer commented 6 years ago

Thank you very mich for all Information! Hello fro.e North Germany FlipFlopRacer Am 18.07.18, 08:31, rustbg notifications@github.com schrieb: Same here. R-XSR, BF 3.4 stable. R2 and R3 are not saved. Using latest lua script with the dsetpoint fixed. Tried so far: R-XSR on LBT and FCC F-Port (un-inverted) Un-inverted s.port + inverted sbus Inverted s.port on softserial + inverted sbus

—You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or mute the thread. {"api_version":"1.0","publisher":{"api_key":"05dde50f1d1a384dd78767c55493e4bb","name":"GitHub"},"entity":{"external_key":"github/betaflight/betaflight-tx-lua-scripts","title":"betaflight/betaflight-tx-lua-scripts","subtitle":"GitHub repository","main_image_url":"https://assets-cdn.github.com/images/email/message_cards/header.png","avatar_image_url":"https://assets-cdn.github.com/images/email/message_cards/avatar.png","action":{"name":"Open in GitHub","url":"https://github.com/betaflight/betaflight-tx-lua-scripts"}},"updates":{"snippets":[{"icon":"PERSON","message":"@rustbg in #113: Same here. R-XSR, BF 3.4 stable. R2 and R3 are not saved. \r\nUsing latest lua script with the dsetpoint fixed. \r\nTried so far:\r\nR-XSR on LBT and FCC\r\nF-Port (un-inverted)\r\nUn-inverted s.port + inverted sbus\r\nInverted s.port on softserial + inverted sbus"}],"action":{"name":"View Issue","url":"https://github.com/betaflight/betaflight-tx-lua-scripts/issues/113#issuecomment-405824028"}}} [ { "@context": "http://schema.org", "@type": "EmailMessage", "potentialAction": { "@type": "ViewAction", "target": "https://github.com/betaflight/betaflight-tx-lua-scripts/issues/113#issuecomment-405824028", "url": "https://github.com/betaflight/betaflight-tx-lua-scripts/issues/113#issuecomment-405824028", "name": "View Issue" }, "description": "View this Issue on GitHub", "publisher": { "@type": "Organization", "name": "GitHub", "url": "https://github.com" } }, { "@type": "MessageCard", "@context": "http://schema.org/extensions", "hideOriginalBody": "false", "originator": "AF6C5A86-E920-430C-9C59-A73278B5EFEB", "title": "Re: [betaflight/betaflight-tx-lua-scripts] Raceband 2 +3 not saved (#113)", "sections": [ { "text": "", "activityTitle": "rustbg", "activityImage": "https://assets-cdn.github.com/images/email/message_cards/avatar.png", "activitySubtitle": "@rustbg", "facts": [

] } ], "potentialAction": [ { "name": "Add a comment", "@type": "ActionCard", "inputs": [ { "isMultiLine": true, "@type": "TextInput", "id": "IssueComment", "isRequired": false } ], "actions": [ { "name": "Comment", "@type": "HttpPOST", "target": "https://api.github.com", "body": "{\n\"commandName\": \"IssueComment\",\n\"repositoryFullName\": \"betaflight/betaflight-tx-lua-scripts\",\n\"issueId\": 113,\n\"IssueComment\": \"{{IssueComment.value}}\"\n}" } ] }, { "targets": [ { "os": "default", "uri": "https://github.com/betaflight/betaflight-tx-lua-scripts/issues/113#issuecomment-405824028" } ], "@type": "OpenUri", "name": "View on GitHub" }, { "name": "Unsubscribe", "@type": "HttpPOST", "target": "https://api.github.com", "body": "{\n\"commandName\": \"MuteNotification\",\n\"threadId\": 301328895\n}" } ], "themeColor": "26292E" } ]

David-VG commented 6 years ago

@rustbg I dont have this issue with FPORT, are you sure you have?

rustbg commented 6 years ago

Fport was even worse for me, as PID page was completely not functional :-( Best result is uninverted (hacked) s.port, where just r2/3 don't work, but everything else is ok, even some say retrying, but eventually do save after a bit more time.

Benaresq commented 5 years ago

I just semi-resolved this issue by changing to Fport. The channels save now, but the script always says "Retrying" after each channel change.

DaEmpty commented 5 years ago

FPort requires a bidirectional inverter on your fc. if you have e.g. an omnibus f4, you are lost. Smartport does not support vtx channel 2+3, and FPort is not working when you want to use the plug of the r-xsr. And even if you solder a cable to the uninverted signal pad, you get retrying messages all the time.

Ignoring such a major bug for almost a year now, is a clear statement from the betaflight development team. The OSD works fine, it's just not very convenient for changing vtx channels. But at least it does it's job.

mikeller commented 5 years ago

@DaEmpty: Why don't you submit a fix for the bug that you think there is, instead of just making accusations of bugs being 'ignored'?

Benaresq commented 5 years ago

@DaEmpty I've got telemetry working and the LUA scripts all appear to be fine, I'm running a custom script to change channel from a switch that seems to work OK.

When I was running Sport, if I had the Channel LUA page open, it would update when I hit my channel change switch, but now I have to select update to see that it's changed. On the plus side, Raceband 2 and 3 work now, so it solved the problem I was having.