jumper t16/ betaflight lua installs, but when I run it with eachine uz65 on, it says "waiting on API" and stay's on that message. Telemetry is on in Betaflight and the sensors show up in edge tx on radio. What am I missing?

[ronbon172]

If your issue looks like a hardware fault or a configuration problem please don't raise an issue here.

Please consider using other user support options such as asking the manufacturer of the hardware you are using, RCGroups: https://rcgroups.com/forums/showthread.php?t=2464844, or Slack (registration at https://slack.betaflight.com/) or other user support forums & groups (e.g. Facebook).

If you believe there is an issue with the firmware itself please follow these steps:

1. Describe your problem;
2. Include ways to reproduce the problem;
3. Provide as much information as possible about your hardware and software, including:
   • what hardware / software you are using;
   • the version of all the software used;
   • how things are connected / wired up.
4. Remove this Text :).

[ronbon172]

what missing info do you need?

[haslinghuis]

Consider joining Discord please.

[ronbon172]

i am a member of discord

[haslinghuis]

Use latest LUA here: https://github.com/betaflight/betaflight-tx-lua-scripts-nightlies/releases

[haslinghuis]

Missing info is about firmware on flight controller, radio and receiver (see opening message of this PR)

[ronbon172]

FC firmwarte: betaflight Crazybeef4fr 4.4.0-rc1 Radio: Jumper t16 Radio firmware: Edgetx "Flying Dutchman" v2.8.0 reciever: Onboard Frsky SPI D8 receiver Version

[klutvott123]

frsky SPI D8 is the issue. try D16 if possible.

[ronbon172]

that worked...thanks :-)