Waiting for Api

[druckgott]

System

Taranis X-Lite Pro Expresslrs 3.2.1 Betaflight 4.4.1 Current Version of this Script

on FrSky it worked, but Today I switch to Expresslrs.

If you believe there is an issue with the firmware itself please follow these steps:

I have "Waiting for Api" if I go to the script I have Expresslrs 3.2.1 with 400 baud rate I have installed Smartport

Checkt all in this Topic: https://github.com/betaflight/betaflight-tx-lua-scripts/issues/470

Hopfully I did not lost anything

[klutvott123]

Make sure telemetry is still enabled in the receiver tab

[druckgott]

Yes it's enabled I checkt it several times

[haslinghuis]

Expresslrs does not provide smartport it uses the crsf protocol

[druckgott]

Ok this I did I ly reinstall after I'd did not work with crsf Protokoll. But what could be case this issue? Can I see any log?

[klutvott123]

is rx and telemetry working? the issue is that the script isn't getting a response to the request.

[druckgott]

Yes that's the Stange point telemetry is working an rx is also working I have checked it several times, I get updates on telemetry and also the rx I can see the movement in the betaflight I also did a flight and all wolres fine on my Lua script for telemetry.

[haslinghuis]

Just installed nightly build on MERCURYG4 with ELRS 3.2.1 and Betaflight setup script seems to be fine. But using Betaflight CMS I get only the main screen and no movement.

I have no VTX installed. @druckgott what VTX setup do you have?

[druckgott]

Betaflight I have compiled it, but I have nothing inside:

Is there a way to deaktivate it temporary (comment out) to check if this is the problem

I have DJI VTX

I also checkt the nightly build, but its same situation. ( https://github.com/betaflight/betaflight-tx-lua-scripts-nightlies/releases/tag/v20230313.7 )

In the Setup of the modul it says for status 500Hz 1Err --> where can I find out what the error is. (Telemety Update is comming I have checkt this in the telemetry page) My board is a Mamba F405 MK2 and I have connected the reciver on tx3/rx3 Pad.

For Betaflight CMS I only get a blank sceen with ony information on the top right [enter] or similiar like this.

[druckgott]

Ko I sed Baudrate to 3.75M and now it works ;-)

[klutvott123]

lol that's strange. It has always worked for me at 400k. you have to use bf master if you want betaflight cms to work

[druckgott]

Ah ok no it's not so Important, I only test it because you mentioned it

[github-actions[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs within a week.

[github-actions[bot]]

Issue closed automatically as inactive.