search

betaflight / betaflight

Open Source Flight Controller Firmware
GNU General Public License v3.0
8k stars 2.86k forks source link

Neutron F435 AIO no DSHOT output #13618

Open error414 opened 2 weeks ago

error414 commented 2 weeks ago

Describe the bug

Neutron F435 AIO with AM32 ESCs. There is not DSHOT outpout for BF 4.5-RC4+. Tested in motor tab.

4.5.0-RC1 WORKS 4.5.0-RC2 WORKS 4.5.0-RC3 WORKS 4.5.0-RC4 NO DSHOT output, motor doesn not spin (works if bidirection dshot is ON) 4.5.0 NO DSHOT output, motor doesn not spin (works if bidirection dshot is ON)

To Reproduce

Flash 4.5.0 into neutron F435mini, go to motor tab, test motors

Expected behavior

dshot output

Support ID

*** Support data submitted *** 
Id: "2c924fd6-2c2b-4ed9-81cd-ec2013125619"

Flight controller

Neutron F435 AIO AM32

Other components

xing 1404 4600kv

How are the different components wired up (including port information)

no other component connected

Add any other context about the problem that you think might be relevant here

MCU AT32F435 Clock=288MHz, Vref=3.27V, Core temp=25degC Stack size: 2048, Stack address: 0x2002fff0 Configuration: CONFIGURED, size: 3771, max available: 16384 Devices detected: SPI:1, I2C:1 Gyros detected: gyro 1 locked dma GYRO=BMI270, ACC=BMI270, BARO=DPS310 OSD: MSP (53 x 20) BUILD KEY: b817110c6bae6144a0c573448561c7c4 (4.5.0) System Uptime: 9 seconds, Current Time: 2024-05-02T19:56:06.837+00:00 CPU:8%, cycle time: 314, GYRO rate: 3184, RX rate: 15, System rate: 9 Voltage: 4 * 0.01V (0S battery - INIT) I2C Errors: 0 FLASH: JEDEC ID=0x00ef4018 16M GPS: NOT ENABLED Arming disable flags: RXLOSS CLI MSP

iHexile commented 2 weeks ago

Having the same issue with my JHEF7DUAL fc, was working fine and then flashed BF 4.5, BLHeli configurator reads from the esc via passthrough, but no spinning when trying to arm or use BF motor direction configurator

Sekilsgs2 commented 2 weeks ago

Same here.. FC BayacRC Dolphin.

And some errors with dshot600, with dshot300 - no errors. And RPM filtering not working normal - create some resonance - without RPM filtering no problems..

MukaroFPV commented 1 week ago

Having similar issues with DShot 600 and 300 as well. I'm running a Tmotor VeloxF7SE. Flashed betaflight 4.5 on it and when I test motors erros on dshot telemetry appear, usually just in one motor. And it reacts when other motors are spinning. Flashed back t9 4.4 and it's fine not errors. Bug in Dshot??