请教Kcptun配置 - Githubissues

RrrrrCcccc commented 6 years ago

你好，SS使用正常，非常感谢，想尝试一下Kcptun，遇到问题，想请教。将 /config/shadowsocks/conf/kcptun.json.disable 的内容修改成以下：

{
    "localaddr": ":1081",
    "remoteaddr": "VPS:KCPTUN端口",
    "key": "密码",
    "crypt": "none",
    "mode": "fast",
    "conn": 1,
    "autoexpire": 300,
    "mtu": 1350,
    "sndwnd": 512,
    "rcvwnd": 128,
    "datashard": 10,
    "parityshard": 3,
    "dscp": 0,
    "nocomp": false,
    "acknodelay": false,
    "nodelay": 0,
    "interval": 20,
    "resend": 2,
    "nc": 1,
    "sockbuf": 4194304,
    "keepalive": 10,
    "snmplog": "/var/log/kcptun_snmp_log.csv",
    "snmpperiod": 0
}

然后重命名为kcptun.json， /etc/init.d/shadowsocks restart /etc/init.d/shadowsocks status 报错

[FAIL] ss-redir is not running ... failed!
[ ok ] ss-local is running.
[FAIL] redsocks is not running ... failed!

是不是因为kcptun的配置有问题？能不能指导下？

FYI，kcptun服务器端是用脚本装的，[v20]Kcptun 服务端一键安装脚本生成的配置如下

{
"localaddr": ":VPS上的SS监听端口",
"remoteaddr": "VPS:KCPTUN端口",
"key": "密码",
"crypt": "none",
"mode": "fast",
"mtu": 1350,
"sndwnd": 128,
"rcvwnd": 512,
"datashard": 10,
"parityshard": 3,
"dscp": 0,
"nocomp": false,
"quiet": true
}

bettermanbao commented 6 years ago

"localaddr"换1082，ss config文件里 serveradd改成127.0.0.1:1082。重启就好了。

RrrrrCcccc commented 6 years ago

非常感谢。

另外多问一句，在SS+GFwlist已经在运行的情况下，还有必要开Redsocks吗？如果开Redsocks的话，/config/redsocks/redsocks.conf.disable 直接改名就可以？

local_ip = 0.0.0.0;
local_port = 1081;

和

ip = 127.0.0.1;
port = 1080;

哪个还需要调整吗？谢谢

bettermanbao commented 6 years ago

redsocks的作用是把流量重定向到本地的socks服务器，redsocks和ss-redir只能使用一个。

bettermanbao / erx-shadowsocks-libev

请教Kcptun配置 #8