Open GoogleCodeExporter opened 9 years ago
Hi,
1. do you have SIM inserted in dongle ?
2. SIM has PIN verification disabled (is a requisite of chan_dongle) ?
If answer to question 2 is NO then, in CLI try execute this
AT+CLCK="SC",0,"<pin>"
where <PIN> is you code.
This AT command disable PIN verification
Original comment by gino.maf...@gmail.com
on 8 Mar 2012 at 2:51
Me too facing same issue , when inserted the same modem to windows with huwei
software there is signal and working good , no pin nothing
pls help me , i tried to check with minicom -s and ots shows the signal
why asterisk is not taking up
thanks
Original comment by sathish...@gmail.com
on 25 Apr 2014 at 8:52
Me too but my problem was easy
1. ls /dev/ttyUSB* if returan string /dev/ttyUSB/utps_diag and
/dev/ttyUSB/utps_modem then write same string in
/usr/local/etc/dongle.conf [dongle0] audio and data .
Original comment by kei...@gmail.com
on 12 Jun 2014 at 1:37
I had similar problem, connect to a 1.5amp 5V supply.. it worked !
Original comment by dwija...@gmail.com
on 19 Jul 2014 at 7:06
Original issue reported on code.google.com by
mlevel....@gmail.com
on 14 Jan 2012 at 7:05