Closed Xybertecnic closed 8 months ago
can you check if your ip is still ok ? see https://github.com/biemond/solaredge.modbus/issues/37#issuecomment-1594463919
plus send me a diagnostic report. so I can see what is happening.
yes, it has a fixed IP address
[Device:03623de3-d317-46dd-bc50-aaaa] 192.1111
Error: connect ECONNREFUSED [192.185.1.14:1502](http://1921111/)
at TCPConnectWrap.afterConnect [as oncomplete] (node:net:1494:16) {
errno: -111,
code: 'ECONNREFUSED',
syscall: 'connect',
address: '192.11111
port: 1502
}
check mdns entry on your phone
check mdns entry on your phone
It doesn't find it either
is your network down/blocked or check the solaredge menu again. you should see this mdns entry or get data in your homey.
I can see it in the solaredge app just fine, when the sun is down I will reboot the inverter to see if that helps. I see in the update log that your app this morning also had an update, can that have anything to do with it?
yes there was an update but it cannot connect to your inverter. so when ip is ok , it can be solaredge menu setting like port or modbus id. else you would see a stacktrace.
Or network issue. also there should be no other app who connects to it and blocks homey.
well I don't know what happens with my Asus Router but I have problems with everything the last few days, before my P1 meter did not connect anymore, now the solaredge, but in the end even though I had set the IP of the SE fixed in my router, it still did not get it assigned, it was set to a completely different IP address. I had to go look into the inverter itself to find out. Everything works now again :-) Maybe next time buy another brand router...
Would you mind removing the message with all the mac details etc? Don't know if it is harmfull but better safe than sorry...
also had this once on some p1 meter , I assign a fixed on mac address with dhcp but totally ignores it and does not connect.
probably some devices does not follow dhcp or ehternet strictly or router is less strict.
in any case, thanks for your help
by the way do you see mdns entry now on your phome?
by the way do you see mdns entry now on your phome?
no, not found, everything else is, but not the inverter
Till this morning communication with my SE4000H HD Wave worked fine, but since a couple of hours I can't get any data anymore. I have deleted and re-added the inverter without issues, but still no data, any idea what might be the problem?