search

biemond / solaredge.modbus

Homey Solaredge modbus app
GNU General Public License v3.0
7 stars 8 forks source link

Solar Edge app not sending live production #52

Open Gits74 opened 10 months ago

Gits74 commented 10 months ago

My solar edge inverter is not sending live production to my homey therefor my solar edge app is not starting flows.

biemond commented 10 months ago

hey, can you send me a diagnostic report. mostly the ip is not correct or modbus is not enabled.

Gits74 commented 10 months ago

Hi Yes ip is probably wrong. How do i find the ip address. The inverter is connected with lan cable.

Stig

lør. 26. aug. 2023 kl. 18:32 skrev Edwin Biemond @.***>:

hey, can you send me a diagnostic report. mostly the ip is not correct or modbus is not enabled.

— Reply to this email directly, view it on GitHub https://github.com/biemond/solaredge.modbus/issues/52#issuecomment-1694404770, or unsubscribe https://github.com/notifications/unsubscribe-auth/BCFE55AAA7U3GWU4F6H6AMDXXIQLNANCNFSM6AAAAAA37WFE5M . You are receiving this because you authored the thread.Message ID: @.***>

biemond commented 10 months ago

sometimes you see on mdns a solaredge entry , else check your router or inverter which ip you got.

RampyLou commented 10 months ago

afbeelding only 1 response at 22:35 from this flow -> see below

"Homey U SE accu = 83.4, 22:35 - 26-08-2023"

I think I only get a connection to the modbus of the SE once, this is set and active, everything worked perfectly on the Homey2019, now not on the H2023 Diagnostic raport : Oeps, zo te zien werkt de app niet

biemond commented 10 months ago

did you remove it from homey 2019? you cannot do both. and we all got 2023 homey and it works perfectly on both .

RampyLou commented 10 months ago

yes removed from the 2019, deinstall - reinstall still the same diagreport oeps....

RampyLou commented 10 months ago

deinstall - reinstall on the 2023 :)

tonsemail commented 9 months ago

Hi I have a Home Pro 2023. Modbus is working. I get current, temperature and voltage. The watts are doing nothing What is the ID used for, or where can i find it

RampyLou commented 9 months ago

norm your ip, port 1502, ID 1

biemond commented 9 months ago

id is the modbus identifier , mostly the inverter = 1 . but can you send me a diagnostic report. don'tknow why you got temp but not the rest.

RampyLou commented 8 months ago

did you remove it from homey 2019? you cannot do both. and we all got 2023 homey and it works perfectly on both .

is it possible because a FlexiO is also connected to the SE (raspPi) that the modbus ignores the Homey app ?

biemond commented 8 months ago

you mean Pi blocks homey? what homey does it connects for a few seconds and then not for 20 seconds or so. so with 2 devices on homey or 2 homey you can still do both or connect to it yourself. sometimes a conflict but it retries at least.

So no clue how other apps are doing things. probably they keep the connection alive.

I know there are some modbus proxy which connects to the inverter and others connect to this proxy.