size of score-board - Githubissues

bigdisp / scoreboard-hardware

Schematics of pcb for the scoreboard.

MIT License

0 stars 0 forks source link

size of score-board #11

Open pluschris opened 8 years ago

pluschris commented 8 years ago

Typically plywood boards have sizes like 1250 x 2500 mm. Could you design the score-board inside that range?

gn36 commented 8 years ago

I will try to rearrange the elements. We also need a more detailed draft and determine the required length of the led stripes.

My last draft, which I think is already fairly condensed, used about 10% more area than that (~3.47m² compared to 3.13m²). Maybe I can reduce that a little bit.

To be determined:

[ ] New draft
[ ] Required length of led stripes for draft
[ ] Required cuts of plywood board for draft

gn36 commented 8 years ago

Additionally, I will look for spare material we could use as a ground base at the field. There might be some material left over that we can use, especially after we had to close some holes after thieves broke in.