search

bigtreetech / BIGTREETECH-GTR-V1.0

BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.
90 stars 55 forks source link

GTR board wiring diagram has the WiFi module mislabeled as TFT. #2

Open NAPCAL opened 4 years ago

NAPCAL commented 4 years ago

0EAF5667-A44C-478B-81CF-F4F4A3514ECB

GadgetAngel commented 4 years ago

I agree!

The Wiring diagram (BIGTREETECH GTR V1.0.png) on the Github page under the subdirectory BIGTREETECH-GTR-V1.0/BTT GTR V1.0/picture/ is not even the same wiring diagram they show in the GTR V1.0 Instruction Manual on page 9 as Figure 8.

I found another wiring diagram on Ebay that had the correct stuff.

I used the wiring diagram from BTT's github page and annotated it to show the corrections that need to be done.

They also need to update the BTT Instruction Manual to show the same Wiring Diagram as they have in their repository!!

I am presently working on a Colored version of the Wiring Diagram that will match the colors I used on my colored_PIN_Diagram. When I get it done I will post it on my github repository which can be found: https://github.com/GadgetAngel/GTR-V1.0-Stepper-Driver-Jumper-Configuration-Manual

Here is the my version: GTR V1.0-Wiring-Diagram_450ppi.pdf

GTR V1 0-Wiring-Diagram_300ppi

Here is the version on Ebay I found: BIGTREETECH GTR V1.0 Wiring Diagram from Ebay.pdf

BIGTREETECH GTR V1 0 Wiring Diagram from Ebay