BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.
i have been struggeling with this issue for a couple of days now.
i had my hotend fan plugged into Fan0 wich is pin PE5
and my parts fan plugged into Fan1 wich is PE6.
however when i turn on my parts fan it keeps turning on my Hotend fan.
so i changed some pins arround in the config and am now using HE1 pin PA1 for my Hotend fan
and Fan0 PE5 for my parts fan. but still when i turn on my parts fan my Hotend fan in HE1 turns on. i'll include my config files.
i have been struggeling with this issue for a couple of days now.
i had my hotend fan plugged into Fan0 wich is pin PE5 and my parts fan plugged into Fan1 wich is PE6.
however when i turn on my parts fan it keeps turning on my Hotend fan. so i changed some pins arround in the config and am now using HE1 pin PA1 for my Hotend fan and Fan0 PE5 for my parts fan. but still when i turn on my parts fan my Hotend fan in HE1 turns on. i'll include my config files.
github.zip