BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.
i have been trying to update Marlin to the latest version on the GTR, everything works fine except for the Fans.
I have my parts fan plugged into Fan0 pin PE5
Hotend fan plugged into Fan1 PE6
and controller board fan plugged into Fan2 PC8
No errors while compiling and everything else seems to be working correctly.
In V2.0.6 the fans turn on when commanded and the hotend fan turns on when it reachs 50º, but in the latest bugfix, they don't turn on at all
Would appreciate any help with this issue.
I'm attaching my config files
config.zip
i have been trying to update Marlin to the latest version on the GTR, everything works fine except for the Fans.
I have my parts fan plugged into Fan0 pin PE5 Hotend fan plugged into Fan1 PE6 and controller board fan plugged into Fan2 PC8 No errors while compiling and everything else seems to be working correctly. In V2.0.6 the fans turn on when commanded and the hotend fan turns on when it reachs 50º, but in the latest bugfix, they don't turn on at all Would appreciate any help with this issue. I'm attaching my config files config.zip