bigtreetech / BIGTREETECH-GTR-V1.0

BIGTREETECH GTR V1.0 motherboard is a high-performance 3D printer main control board with the core controller STM32F407IGT6, which was launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., aiming at solving some problems existing in the motherboard market. The BIGTREETECH GTR V1.0 is the motherboard, and the BIGTREETECH M5 V1.0 is the expansion board.

90 stars 55 forks source link

Configure the BTT TFT70 V3.0 firmware v3.0.27 #68

Closed Decalis1979 closed 3 years ago

Decalis1979 commented 3 years ago

I have a Geeetech 3 hotend on , in version V3.0.26 the exhausts appeared normal on the screen (E0, E1 and E2). When I upgraded to V3.0.27 they no longer show up. I modified the config.ini putting hotend_count:1 and (Extruder Count) ext_count:3. And I can't move the E1 and E2 extruders because they don't appear to select on the screen.

radek8 commented 3 years ago

Your question is in the wrong repository. Questions about FW TFT can be found here: https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware/issues

If you have a mixing extruder, try to set it in the FW TFT display in the Configuration.h file

define MIXING_EXTRUDER 1

Then compile your own FW and upload it to the display.