bigtreetech BIGTREETECH-MINI-UPS-V2.0 issues

bigtreetech / BIGTREETECH-MINI-UPS-V2.0

BigTree Technology Co., Ltd. developed this power failure module to detect a power failure during printing and ensuring the print can be resumed after power is returns.

83 stars 14 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

24v UPS Signal Wire to Nonstandard Pin

#27 viyer00 opened 6 months ago
0
24v 1.0 logic level

#26 Abasz opened 11 months ago
0
When using UPS and Relay 1.2 printer does not immediatly shut off

#25 timknowlden opened 1 year ago
0
Does not resume after power back on

#24 timknowlden opened 1 year ago
0
power loss not detected by main board

#23 pratyushganguly opened 1 year ago
2
BTT Mini UPS 24V V1.0

#22 G-many2k opened 1 year ago
2
24v ups on skr mini e3v3 + tft35 e3 v3.0

#21 xx1180 opened 2 years ago
0
Documentation out dated, Marlin should be #define POWER_LOSS_PULLUP or #define POWER_LOSS_PULLDOWN ?

#20 badbod opened 3 years ago
6
Safety button

#19 l1q1d opened 3 years ago
1
UPS Stops Printer from booting.

#18 sinole1987 opened 3 years ago
35
How does work Mini UPS with Octoprint ?

#17 Meshchankin opened 3 years ago
1
After power loss - resuming higher that stopped.

#16 cookins opened 3 years ago
0
Print Halted immediately after starting

#15 Joe-githubby opened 3 years ago
4
Not working on Marlin 2.7.1.2 SKR1.4

#14 Ejay-3D opened 3 years ago
3
how do you connect this with relayv1.2

#13 sinole1987 closed 2 years ago
2
No high-level 5V control signal

#12 dronn1974 opened 3 years ago
1
Marlin-2.0.7.2-SKR-mini-E3-V2.0 does not work with BTT UPS 24V V1.0

#11 bartik opened 3 years ago
17
Btt ups doesn't work on versions above 2.0.5

#10 berrenger opened 3 years ago
19
How long to normally discharge UPS after Ender 3 Pro power off?

#9 Ve6hgw opened 4 years ago
3
How to connect UPS to SKR E3 DIP

#8 Meshchankin opened 4 years ago
0
BTT GTR v1.0 and UPS_24V

#7 TheMiguelBi opened 4 years ago
2
Wiring for 12V mini ups with MKS_GEN_V1.4

#6 hussainsail2002 opened 4 years ago
1
make my SKR PRO V1.1 not working

#5 BrianS2K opened 4 years ago
1
This module damaget SKR 1.3 and LCD

#4 Mysel07 opened 4 years ago
0
How to power off

#3 CristianoGorla opened 4 years ago
8
ups detect also power outage by starting the printer

#2 TB1405 opened 4 years ago
5
does not do anything

#1 stefi01 opened 4 years ago
5