search

bigtreetech / BIGTREETECH-OCTOPUS-V1.0

This is Octopus open source material
554 stars 328 forks source link

Octopus v1.1 cannot find MCU in Klipper #116

Open ROADwarrior82 opened 2 years ago

ROADwarrior82 commented 2 years ago

Board flashed firmware fine. I connected 24v power, and all of the stepper/fan/endstops, and now it will not connect again. I have reflashed, I have remade my RaspPi's os. I have tried every usb port on the pi, I have tried every cable I have. Nothing.

SMTDesigns commented 2 years ago

I have the same issue. The Octopus USB-C is recognized as a enumerated serial port in klipper (I installed fluiddPi for the os and connections), Of note, the Pi USB-C will not work and enumerate the controller port. The 2.0 and 3.0 ports at least get a port folder created in Pi. The only thing I note is that I get ttyACM0 for the OS port name instead of ttyS0 or ttyAMA0. If I plug the Octopus into a PC, I get a USB serial connection at probably 250000 which I can't get clear messages from (yet).

inkhalistan commented 4 weeks ago

I have the same issue with marlin