I’m reaching out for assistance with my BTT Octopus Board. I’ve been encountering some issues flashing the firmware.
Specifically:
When attempting to flash firmware.bin via the SD card, the file does not seem to change to FIRMWARE.CUR.
I've tried different SD Cards... same issue.
A suggestion from an online forum indicated that this might be related to the bootloader.
I followed the steps outlined in the DFU update guide to update the bootloader (link: DFU Update Bootloader Guide). However, I am now unable to establish a connection via USB-C. Despite trying multiple USB cables and ports, I keep receiving a "No DFU Detected" error.
Could you provide guidance on the following:
• Any troubleshooting steps for the "No DFU Detected" issue?
• Possible reasons why the firmware is not switching to FIRMWARE.CUR?
I’m reaching out for assistance with my BTT Octopus Board. I’ve been encountering some issues flashing the firmware.
Specifically:
When attempting to flash firmware.bin via the SD card, the file does not seem to change to FIRMWARE.CUR. I've tried different SD Cards... same issue.
A suggestion from an online forum indicated that this might be related to the bootloader.
I followed the steps outlined in the DFU update guide to update the bootloader (link: DFU Update Bootloader Guide). However, I am now unable to establish a connection via USB-C. Despite trying multiple USB cables and ports, I keep receiving a "No DFU Detected" error.
Could you provide guidance on the following:
• Any troubleshooting steps for the "No DFU Detected" issue? • Possible reasons why the firmware is not switching to FIRMWARE.CUR?
https://i.postimg.cc/bY67hf5r/PXL-20240823-235137970-MP.jpg https://i.postimg.cc/c4rV15qm/Screenshot-2024-08-24-100755.png