How to configure ps_on on klipper J36 / PE11

bigtreetech / BIGTREETECH-OCTOPUS-V1.0

This is Octopus open source material

562 stars 336 forks source link

How to configure ps_on on klipper J36 / PE11 #46

Open carmanuelz opened 3 years ago

carmanuelz commented 3 years ago

Hi, Im trying to use the ps_on pins with klipper whit the SKR Octopus 1.1, but it doesnt work. I am using PE11 from J36 to power a Relay, but I have not been successful. This is my config on klipper:

[output_pin ps_on]
pin: PE11
value: 1

octopus_ps_on

wolfgangmauer commented 3 years ago

I use a BTT Relay 1.2 and it works fine:

[output_pin power] pin: PE11 value: 1 shutdown_value: 0

bailout00 commented 2 years ago

FWIW there are two connections on the relay. I had to use the furthest from the logo on the top of the board but this config did work.