search

bigtreetech / BIGTREETECH-S42B-V1.0

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed
108 stars 53 forks source link

Manual and CAN bus control for V2.0 board? #45

Open mfxpyro1 opened 3 years ago

mfxpyro1 commented 3 years ago

Where can I find the manual and details on how to use CAN bus to control the S42B V2.0 board ? I can't seem to find it anywhere.

Wayne2580 commented 3 years ago

I am interested in this as well

Frontpage32 commented 3 years ago

I too am interested also but for the s42b v2 which has the CAN BUS, I have gotten some info but it's depressing if correct. Seems it only works on specific duet boards and doesn't work on any BTT boards at this time. (Please correct me if I am wrong) So it's is basically useless till BTT makes a board or you switch to duet well due to the cost that is not going to happen anytime soon. This is the board I was directed to but seems duet has 2 or 3 that can use CAN BUS.

https://duet3d.dozuki.com/Wiki/Duet_3_Mainboard_6HC_Wiring_Diagram

Sunbuzz commented 3 years ago

I am also interested.

NZ-Nitro commented 3 years ago

i CANT FIND ANY INFORMATION anywhere ON THE s42b v2.0

dzid26 commented 1 year ago

Use Intellistep firmware.