BIGTREETECH SKR-E3-DIP-V1.0 motherboard is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
I have some 2017 CR-10's with the stock motherboard and if you connect the stock MOSFET to the E3 SKR DIP v1.1 via the jumper cable the Creality board uses then you have to reverse the positive and negative leads from the way they were on the stock board. The signal and ground are backwards on the SKR DIP.
I have some 2017 CR-10's with the stock motherboard and if you connect the stock MOSFET to the E3 SKR DIP v1.1 via the jumper cable the Creality board uses then you have to reverse the positive and negative leads from the way they were on the stock board. The signal and ground are backwards on the SKR DIP.