Open KyleLampkin opened 4 years ago
Hi.
G35 seems to be not very popular.....
I can see, that you opened some other tickets related to this topic in other repositories, so you have a lot of experience already.
Is there anything particular which makes you believe the reported issue is related to this particular mainboard? Do you use the standard Ender 3 screen or any other screen? And what is the status of the issue?
Please let us know
Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
Please help the community and close the ticket once you do not need it anymore. Thank you
I have an Ender 3 that i purchased a SKR E3 Mini Dip for. I was able to compile the firmware without to much trouble and even made a 3D Touch probe work with the probe and servo ports. My problem is that when I send a G35 S41 it goes to an arbitrary point in the direction of the front left corner (facing the screen on the right) and goes down and probes fine but then it says G35 failed at front right corner with an X axis value and a Y axis value and then proceeds to re-home all axis. I think it is in the settings that I changed in configuration_adv.h but I cannot seem to make it work even with the defaults. I have attached my platformio.ini as well as configuration.h and configuration_adv.h in this platformio zip file. Thanks in advance for any help you can give me.
platformio.zip