OS can't see the board - Githubissues

bigtreetech / BIGTREETECH-SKR-MINI-V1.1

ARM Cortex-M3 series STM32F103RCT6 chip with 32-bit CPU 72MHz. Equipped with highly modular open source firmware Marlin2.0, convenient for users DIY and secondary development, exempt from the worries of the core code;

34 stars 49 forks source link

OS can't see the board #13

Open 100307009 opened 5 years ago

100307009 commented 5 years ago

Greetings, After trying to install smoothie firmware(compilation successful, loaded firmware.bin into sd card and generic config.txt just to test it), the device stopped being recognized by the OS after that. On windows it says that "device failed to provide descriptor" and on linux(mint) pronterface and others are failing to indentify it. Any idea what it might be?

3DSmitty commented 5 years ago

This board does not support smoothieware

anm8tor commented 5 years ago

I'm having this same problem on my Raspberry Pi 4. Using the main branch of Marlin 2.0 bugfix, the Pi doesn't even register that the USB cable is plugged in. Any thoughts on that? @3DSmitty

Rodov commented 3 years ago

Can't connect SCR mini 1.1 to Windows 7 x64. It say "Unknown Device". Drivers from GitHub didn't help - it won't install. Updating firmware with Marlin 2.0.7.1 from SD card was successful.