ARM Cortex-M3 series STM32F103RCT6 chip with 32-bit CPU 72MHz. Equipped with highly modular open source firmware Marlin2.0, convenient for users DIY and secondary development, exempt from the worries of the core code;
Hi All,
I try to upgrade my older Prusa i3 from 8-bit mainboard to the SKR mini 1.1. I re-used the RepRapDiscount Smart Controller LCD for my displayer. I cloned the latest repository here and compiled the firmware.bin file by VSCode, I put the bin file into SD card and power on by 12V but nothing happen. There is only red light on on the board, my LCD didn't turn on.
How to make sure the problem is firmware or hardware problem?
Hi All, I try to upgrade my older Prusa i3 from 8-bit mainboard to the SKR mini 1.1. I re-used the RepRapDiscount Smart Controller LCD for my displayer. I cloned the latest repository here and compiled the firmware.bin file by VSCode, I put the bin file into SD card and power on by 12V but nothing happen. There is only red light on on the board, my LCD didn't turn on. How to make sure the problem is firmware or hardware problem?