search

bigtreetech / BIGTREETECH-SKR-MINI-V1.1

ARM Cortex-M3 series STM32F103RCT6 chip with 32-bit CPU 72MHz. Equipped with highly modular open source firmware Marlin2.0, convenient for users DIY and secondary development, exempt from the worries of the core code;
34 stars 49 forks source link

How to connect a single Z motor? #9

Open GilbMata opened 5 years ago

GilbMata commented 5 years ago

I need to connect a single motor in Z, but this will not work if it does not have both motors connected, how to operate only one?

ThWoell commented 5 years ago

Just install a pair of jumper connectors as shown on the frontpage of instructions leaflet. The motors will be connected in serial to the driver, so missing the jumper connectors will leave the motor circuit "open".

GilbMata commented 5 years ago

Just install a pair of jumper connectors as shown on the frontpage of instructions leaflet. The motors will be connected in serial to the driver, so missing the jumper connectors will leave the motor circuit "open".

Omg How I did not see those jumpers, I checked it several times

Thank You¡

Rodov commented 3 years ago

This solution is not obvious, so need to add this into the documentation.