Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high performance 3D printer master board with STM32F407ZGT6 as the core controller, BIGTREETECH-SKR-PRO-V1.1.
Hi, it's been a week since I tried to configure these stepsticks. First, no connection to tmc (you need to put a jumper under the driver), now when it connects, I can not set sensorless homing. What I would not do, it works when and how it wants, but usually ends with an error and restarting the printer. There is someone here who solved this problem?
hudy85
commented
4 years ago 
Hi, it's been a week since I tried to configure these stepsticks. First, no connection to tmc (you need to put a jumper under the driver), now when it connects, I can not set sensorless homing. What I would not do, it works when and how it wants, but usually ends with an error and restarting the printer. There is someone here who solved this problem?