search

bigtreetech / BIGTREETECH-SKR-PRO-V1.1

Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high performance 3D printer master board with STM32F407ZGT6 as the core controller, BIGTREETECH-SKR-PRO-V1.1.
276 stars 222 forks source link

SKR PRO 1.1 + TMC5160, Homing is "working" but no other movement #117

Open mcmuff91 opened 4 years ago

mcmuff91 commented 4 years ago

Hello everyone, atm I´am working on a big selfmade Delta-printer for Ceramics. The setup:

The main problems:

After homing the Printer is not responding to movement commands via Pronterface or the Controller.

Tried multiple Versions of Marlin ( the BTT-Version, 2.04, 2.05). I have no idea how to fix the Problem.

Marlin config 2.0.5.zip

oldman4U commented 4 years ago

Hello mcmuff91.

Could you please let us know the status of the reported issue and close this ticket, in case the issue has been solved in the meantime.

Thank you

oldman4U commented 4 years ago

@bigtreetech Could you please close this unneeded ticket. Thank you

oldman4U commented 4 years ago

Please help the community and close the ticket once you do not need it anymore. Thank you

evandene commented 3 years ago

Hello everyone, atm I´am working on a big selfmade Delta-printer for Ceramics. The setup:

  • Skr Pro
  • TMC 5160 V1.2 BTT (removed the CLK Pin)
  • Nema 23, 3 A, 1,8°
  • 24 Volt Power supply
  • RepRap Full Graphic LCD

The main problems:

  • When i send G28 via Pronterface or via the RepRap-Controller the printer starts to home. But one after the other (x,y,z). There is no movement of all three Axis at the same time, so I have to move the Effector to the upper end of the printer. The axes are hitting the endstops and doing a rebump . But after this there is no movement to the safe zone (enabled DELTA_HOME_TO_SAFE_ZONE)

After homing the Printer is not responding to movement commands via Pronterface or the Controller.

Tried multiple Versions of Marlin ( the BTT-Version, 2.04, 2.05). I have no idea how to fix the Problem.

Marlin config 2.0.5.zip

Did you get your DELTA Printer to work?