search

bigtreetech / BIGTREETECH-SKR-PRO-V1.1

Aiming at some problems existing in 3D printed motherboards in the market. Bigtree Technology Co., Ltd. launched a high performance 3D printer master board with STM32F407ZGT6 as the core controller, BIGTREETECH-SKR-PRO-V1.1.
274 stars 222 forks source link

Two new Pro v1.2 board wont flash #219

Open Mountain3d opened 2 years ago

Mountain3d commented 2 years ago

Hello,

I am no stranger to the space, I run a CAD/Printing company in Montana. I've followed the very basic steps to flash probably 1000 boards for myself a folks over the years.

I picked up these two skr pro 1.2 boards for my IDEX builds for the store and neither of them will flash fw. I BTT products usually are a massive gamble as many of the ones I've either had or sold has some stupid problem. However these were the best option fir the budget of these builds.

The task? Simple. Flash my proven builds on to these boards and get them installed. I learned a long time ago especially with BTT products to do a "bench flash" before committing to the install and burial of a mabo.

They aren't shipping with SD cards anymore as I know those as generally the best for fw's

I power down, pop in tf card and power up. Nada. I tried the second board, same same. I'm at a total loss how in the h•e•l•l can I get two mabo's that are trash in the exact same way from two different parts of the globe.

If anyone has any insights I would greatly appreciate the help as these two machines are severely overdue.

TIA!

SodiumEx commented 2 years ago

I'm having the same exact issue with 2x new skr pro 1.2 . Like just received one today. I'm no stranger to the skr pro 1.2 either . I have around 8 or 9 of them

Mountain3d commented 2 years ago

I figured it out.

Insert SD card in to computer

Type in "diskpart" one word.

Your SD will the last drive available so let's just say 3 for example .

Type " select disk 3"

The. Upon the next prompt type "clean"

This will.strip the sD. You can close the window now

Now, type "Disk Part" two words this time.

Down at the bottom scroll to the bottom of the window and you will see an unallocated drive being your SD you just stripped. Right click, format, fat32, now type in 7024 in the next window for available space. Finish Finish format. Load your .bin and flash the board.. its got some space cap for cards idk how or why but this is the trick. Read what I wrote three times. Follow the steps.

Food luck!

On Mon, Mar 28, 2022, 10:26 AM SodiumEx @.***> wrote:

I'm having the same exact issue with 2x new skr pro 1.2 . Like just received one today. I'm no stranger to the skr pro 1.2 either . I have around 8 or 9 of them

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1/issues/219#issuecomment-1080862816, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVJDJYVBIAOGUL2W7CLG5WTVCHMUVANCNFSM5Q4PYROQ . You are receiving this because you authored the thread.Message ID: @.***>

Mountain3d commented 2 years ago

EDIT

SKIPPED A STEP

Insert SD card in to computer

Type in "diskpart" one word.

THEN TYPE "LIST DISK"**

Your SD will the last drive available so let's just say 3 for example .

Type " select disk 3"

The. Upon the next prompt type "clean"

This will.strip the sD. You can close the window now

Now, type "Disk Part" two words this time.

Down at the bottom scroll to the bottom of the window and you will see an unallocated drive being your SD you just stripped. Right click, format, fat32, now type in 7024 in the next window for available space. Finish Finish format. Load your .bin and flash the board.. its got some space cap for cards idk how or why but this is the trick. Read what I wrote three times. Follow the steps.

Food luck!

On Mon, Mar 28, 2022, 10:26 AM SodiumEx @.***> wrote:

I'm having the same exact issue with 2x new skr pro 1.2 . Like just received one today. I'm no stranger to the skr pro 1.2 either . I have around 8 or 9 of them

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1/issues/219#issuecomment-1080862816, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVJDJYVBIAOGUL2W7CLG5WTVCHMUVANCNFSM5Q4PYROQ . You are receiving this because you authored the thread.Message ID: @.***>

SodiumEx commented 2 years ago

I did what you said and still no luck

Mountain3d commented 2 years ago

Can you zoom?

On Mon, Mar 28, 2022, 3:20 PM SodiumEx @.***> wrote:

I did what you said and still no luck

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1/issues/219#issuecomment-1081161238, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVJDJYSPDXQ3RR5QYFPAARLVCIPBHANCNFSM5Q4PYROQ . You are receiving this because you authored the thread.Message ID: @.***>

SodiumEx commented 2 years ago

Share your marlin if possible

Mountain3d commented 2 years ago

If your board isn't converting the .bin to .cur then its not the build. Its simply not reading the card.

On Mon, Mar 28, 2022, 4:28 PM SodiumEx @.***> wrote:

Share your marlin if possible

— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1/issues/219#issuecomment-1081215545, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVJDJYWPCT7FKGCQGV4UKADVCIW7NANCNFSM5Q4PYROQ . You are receiving this because you authored the thread.Message ID: @.***>

SodiumEx commented 2 years ago

If your board isn't converting the .bin to .cur then its not the build. Its simply not reading the card. … On Mon, Mar 28, 2022, 4:28 PM SodiumEx @.> wrote: Share your marlin if possible — Reply to this email directly, view it on GitHub <#219 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVJDJYWPCT7FKGCQGV4UKADVCIW7NANCNFSM5Q4PYROQ . You are receiving this because you authored the thread.Message ID: @.>

It does build to .cur . Just won't do anything after