search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1.01k stars 1.15k forks source link

Skr 1.4 turbo does recognize card or usb #274

Open SkysoulPrt opened 4 years ago

SkysoulPrt commented 4 years ago

I have this problems in 2 boards that customized marlin.

set the initial configuration uploaded worked, connect only the steppers, check sensores & movement. disconnected, adjusted the configuration, uploaded with platformio, the board stopped being recognized properly doesnt load the card, i did reset the firmware on sd card, but no luck, finaly i decided to plug the tft, a starts and locks with Err max t E1, and thats it. Both of the board did the same with different configurations and just uploading directly with usb connected. So they both boot and are and sometimes it is recognized as marlin devices on pc . imagem. Already tried to insert initial bin file on sd card but no success as well

Oatmeal15 commented 4 years ago

I have a similar issue and same boat with experience.

SkysoulPrt commented 4 years ago

Solved, i searched the posts seems that skr 1.3 had the same problem, and ask on thread for files used so i put bin of 1.3, and suprisely it reflash and managed to get thing working from 0, and redo my config, so check this thread https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/issues/223 Thanks to 2 Sundancer78