search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1.01k stars 1.15k forks source link

No heating bed #303

Open Bandzior89 opened 4 years ago

Bandzior89 commented 4 years ago

Hi all

First one... sorry for bad english:)

My printer is made from SKR 1.3 XYZ - TMC2208 UART E - A4988 BLTOUCH TFT24 v1.1 Marlin Version 2.0.5.3

I have got some issues with configuration... fighting last week but dont have idea what is going on...

1. Hotbed is turned off at tft (i think) All the time at TFT i see temp=0 (thermistor is 100% OK) When trying incrase bed temp at display i recive "unknown command M140" I have all bed functions in configuration.h uncomented... i think! When changing pin from bed to e1 i have got the same result

2. When im changing something at marlin and uploading at board there is no efects... but not at all things. For example A. Im turning on BLTOUCH - its ok, all changes are accepted B. Im changing for exaple steps/mm or Z offset by marlin - no changes, still the same like defoults on TFT configuration.h file. It's flustrating becouse of for example nozzle to probe offset, whatever i do... still the same, and cant chagne it from TFT.

Is there posibiliete that is problem with serrial port numbers?

The second issue is for live with it, but WTF is with that heating bed? Is there something that I need to do more like uncoment

If i dont forget i will add my config later, now at other computer.

Bandzior89 commented 4 years ago

Here are my configs https://drive.google.com/file/d/1rLvsI7KEiMt3ztsfy5-t9USoILdspe7c/view?usp=sharing - config.adv

https://drive.google.com/file/d/1auns7MiAAMPD0JWVuUcUN1YRFUCdu0VC/view?usp=sharing - config.h