search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1.01k stars 1.15k forks source link

SKR 1.4 Turbo unable to update firmware #338

Open hantrax opened 4 years ago

hantrax commented 4 years ago

Hi.. I have an SKR 1.4 Turbo with detached sd-card connector bought from Aliexpress BTT Global store, I am trying to get it replaced but I don't know if I will succeed. I have successfully uploaded Marlin directly from VisualStudioCode, but now I can't upload a new firmware... from VSCODE, i receive an error on upload_port. Any idea?

Thanks Stefano

Sundancer78 commented 4 years ago

Hello, did you define the upload port in VS? Why does one take off the SD card connection or the SD reader? via FTDI adapter there should still be a possibility to flash.

hantrax commented 4 years ago

Hi.. I received the card with the sd-card reader detached. I try to define port on VS but I don't work. Can I use the BTT flash writer to flash?

elmolinger commented 4 years ago

Hi.. I received the card with the sd-card reader detached. I try to define port on VS but I don't work. Can I use the BTT flash writer to flash?

Did this problem still presist?

hantrax commented 4 years ago

Hi... I have bought a new SKR 1,4.. and work fine. I cant't upload a new firmware on the other board..

orrgry commented 4 years ago

Hi... I have bought a new SKR 1,4.. and work fine. I cant't upload a new firmware on the other board..

Hi, does your new board have any issue when flashing updates of marlin like your old board?