32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
As soon as I try to test the Hotend or run an autopid the board appears to crash and reboot. The bed heats fine and the board appears to be wired correctly. I have tried compiling my own Marlin 2 bugfix and several preconfigured versions I found. No luck with the Hotend. Anyone have any advice?
As soon as I try to test the Hotend or run an autopid the board appears to crash and reboot. The bed heats fine and the board appears to be wired correctly. I have tried compiling my own Marlin 2 bugfix and several preconfigured versions I found. No luck with the Hotend. Anyone have any advice?