search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1.01k stars 1.15k forks source link

BigTreeTech SKR board.stl is wrong #42

Open pw-sys opened 5 years ago

pw-sys commented 5 years ago

BigTreeTech SKR board.stl is wrong the outer connector of the stepper driver is 2.4mm too far in. The two big connectors are (heatbed and 24Vin) are 1.3mm to wide TH1 TH0 TB are 1.3mm too far to the right and should be touching AUX-1 and should be 23.9mm wide not 22.7mm.

USB Port is 1mm to narrow

error1+2 error3

carl1961 commented 5 years ago

Most likely there Board had been revised since they did that STL and also why would you need that STL I think it's just a visual look

LongLiveCHIEF commented 5 years ago

The STL helps to model enclosures or other extensions to the board

LongLiveCHIEF commented 5 years ago

@pw-sys does this thigiverse thing have it right? https://www.thingiverse.com/thing:3701548