search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1.01k stars 1.15k forks source link

skr v1.4 turbo tmc2130 spi TMC CONNECTION ERROR #425

Open 89oinotna opened 3 years ago

89oinotna commented 3 years ago

Hi, i have a problem with this driver every time saying TMC CONNECTION ERROR

this is my configuration usin Marlin 2.0.6.1

Marlin.zip

board

oldman4U commented 3 years ago

Is there a red led between the 20 fuse and the power input?

89oinotna commented 3 years ago

Is there a red led between the 20 fuse and the power input?

@oldman4U yes there is

oldman4U commented 3 years ago

And you have the tmc2130 defined in Marlin?

89oinotna commented 3 years ago

@oldman4U yes, as can see it from the attached zip that contains configuration.h and configuration_adv.h

oldman4U commented 3 years ago

And of course you set the jumpers right.

89oinotna commented 3 years ago

yes they are right

tommyloon commented 3 years ago

I have the same problem. Jumpers correct, Drivers correct, TMC2130 steppers. Software_SPI is on. TMC connection error on the screen. And errors on all drivers with the M122 command. Board en drivers are new and bought from the same shop as a SPI package. Tried the marlin bugfix original build and the marlin version form bigtreetech. Same result.

Edit: The problem is fixed. One stepper driver is faulty. This resulted in an error for all four the stepper drivers.