32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1.01k
stars
1.15k
forks
source link
There is compatibility between SKRV1.3 and LV8729 ? #430
Sorry, my English is not very good
My machine is voron2.4
firmware is Klipper,MCU:SKR_V1.3; DRIVE:LV8729 ,moto 1.8 degree,Synchronous wheel=20;
in printe.cfg ,the step_distance needs 2 times the value。
For example, 64 step_distance=0.006250,But it actually requires 0.003125。
Sorry, my English is not very good My machine is voron2.4
firmware is Klipper,MCU:SKR_V1.3; DRIVE:LV8729 ,moto 1.8 degree,Synchronous wheel=20; in printe.cfg ,the step_distance needs 2 times the value。 For example, 64 step_distance=0.006250,But it actually requires 0.003125。