search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1k stars 1.15k forks source link

SKR V1.3 TFT35 V2.0 Marlin not working #449

Closed jasonfox7 closed 3 years ago

jasonfox7 commented 3 years ago

  1. Smoothieware firmware from this github works. TFT35 V2.0 and SKR 1.3 connect and I can control the printer.

  2. Marlin firmware from this github does not work. TFT35 V2.0 and SKR 1.3 fail to connect. Shows "no printer attached" and throws a "kill()" error after a few seconds. I cannot send commands to printer, and there is no communication at all. This is not a hardware issue, because the smoothieware firmware you have provided works correctly.

Something in the provided Marlin firmware is not set up correctly for the TFT35 V2.0 to communicate.

Angeliqueratna commented 2 years ago

may i have the firmware smoothiware for tft35 v2.0 and skr 1.3