bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required

1k stars 1.15k forks source link

SKR V1.4turbo doesnt connect thru USB after VSCode upload #456

Closed Kscott73 closed 3 years ago

Kscott73 commented 3 years ago

I moved the jumper to USB pins, then plugged USB cable into the computer. The board loaded up and connected to COM3. I uploaded Marlin firmware thru VSCode

now it wont connect but powers up the board

oldman4U commented 3 years ago

Which serial scare defined in configuration?

Kscott73 commented 3 years ago

i pulled the sd card and loaded file straight to the card. inserted card back in the skr board and plugged it in to the usb port. and guess what, it found the COM3 port.

define SERIAL_PORT -1

define SERIAL_PORT_2 0

define BAUDRATE 250000

side: wont connect to pronterface Serial error: could not open port 'COM3': WindowsError(5, 'Access is denied.') SOLVED - VSCode was connected

oldman4U commented 3 years ago

Please help the community and close the ticket once you do not need it anymore. Thank you

Kscott73 commented 3 years ago

sry

oldman4U commented 3 years ago

No problem. Thank you and happy printing

Kscott73 notifications@github.com schrieb am Do. 5. Nov. 2020 um 18:05:

sry

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/issues/456#issuecomment-722509165, or unsubscribe https://github.com/notifications/unsubscribe-auth/AM6XKZFHNLZUDDQNMDT4Z7LSOLLMTANCNFSM4TKYFVFA .