search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1k stars 1.15k forks source link

installed skr1.4 turbo in siderwinder x1 #457

Closed Kscott73 closed 3 years ago

Kscott73 commented 3 years ago

hey i installed a BTT SKR 1.4 turbo into Sidewinder X1 today, I found that the dual z and the extruder wires where crossed. And I had the extruder inverted so it was unloading when I selected load. but they were easy fixes. My problem is when I pressed "Home", X,Y,Z went to the farthest positions.

oldman4U commented 3 years ago

Hi

You can change the homing direction in Marlin.

Kscott73 commented 3 years ago

I need more. I am trying to run stallguard on x,y,z and it causes alot of errors

oldman4U commented 3 years ago

First problem solved?

Which error?

Kscott73 commented 3 years ago

i started over, using marlin's bugfixed version. i think problem was because i changed #define INVERT_X_DIR, i forgot to invert #define X_HOME_DIR

my coordinates are still inverted. extruder head moves in the right direction but home is 300,310,400 btttft35

Kscott73 commented 3 years ago

i finally managed to get motors and coodinates correct today i had help to get screen updated and correct(thank you oldman4) so the only thing left is sensorless homing

IMG_20201110_085610__01

oldman4U commented 3 years ago

Good.

But Marlin is not recognized and TFT firmware is completely outdated.

Kscott73 commented 3 years ago

well; marlin finally did get recognized and finallly gave up on sensorless home, cut the pins and put the endstops back on 👎 : but i have working machine. i will come back to sensorless home 6-12 months when it is more reliable.. just need 4 steppers