bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1k stars 1.15k forks source link

no USB Connection after Marlin Upload - Bricked? #479

Open Laube92 opened 3 years ago

Laube92 commented 3 years ago

Dear all,

after i connected the SKR 1.4 turbo first time with my pc and flashed the Marlin FW the board can not connect to my computer anymore. There will be no device in windows device manager and i can not find it. I tried several SD cards - no success. I tried to fix the issue by connecting an ST Link V2, but i dont get a connection with the ST Link utility software. When i click Connect to the target i get the error "select normal mode or HotPlug mode"... i tried all configurations, nothing works to get a connection.

Can anybody help? Marcel

oldman4U commented 3 years ago

Why not downgrade to see?

NezSez commented 3 years ago

Flash the original firmware.bin which came with the stock SDcard back onto the board, assuming the usb connection worked originally with it and that it successfully flashes. If you can connect then you know one of the options/settings you've enabled has caused an issue and you can start to single out the culprits. It would help if BTT supplied the default configs they used to generate the firmware.bin files they distributed .