Help whit skr v1.4 Turbo tmc2209 on cr10s

[omarmunoz5371]

First sorry for my horrible English, but here is what I'm dealing i upgrade a CR10s Whit a Skr v1.4 Turbo whit tmc2209 Driver using sensorless homing, which means didn't clip the leg and added a TFT35 E3 3.0, a probe for z and hot end E3d V6.

So far sensorless homing works board respond to screen and setting temperatures seems to work but when a slice an stl at random times the printer just crash meaning the printer stops maintain the temperature of the hot end and bed but the screen is unresponsive i try instead of using the screen sd car i doit thru direct from the boar but is show in the screen it shows an error can access the sd card so i decide to find a problem change several sd cards no luck there so i was going to use my printer whit octoprint anyways so i try that but to at randoms times, octoprint sends the message lost the connection whit the printer and yes printer stay in temperatures but stop moving im pretty much new in compiling the configuration.h i folow a web and youtube videos everything seems to work last resort i did was replace the sks board with a new one but is showing the same problems i will attach the configuration.h if someone can help that be great and point what im was configuring wrong in that case learn more about my printer here are the links for the configuration.h and adv.h thanks in advance

configuration.h https://drive.google.com/file/d/1wb7IkcERwFxFAi02GXTQy_FWk60SQX-3/view?usp=sharing

configuration_adv.h https://drive.google.com/file/d/1JdEy2NNghORFq8ANjZ0qVX8esyn3Of00/view?usp=sharing

[Tannoo]

You should post this here: https://github.com/MarlinFirmware/Marlin/issues