32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
999
stars
1.15k
forks
source link
SKR 1.4 + TMC2209 + TFT35 V2.0 last firmware : Smart Filament Runout does not work #549
Hi,
I 've got a problem on one CoreXY (BLV Cube) ..
I have SKR 1.4 + 5x TMC2209 + TFT35 V2.0 with last firmware installed.
I have BigTree Smart Filament Runout sensor installed. It was configured in TFT config file .
Sensor does not seem to work .
It's connected and configured in Marlin to use XMAX
You should connect the sensor to the SKR and configure its function in Marlin,
Or connect it to TFT and configure it in TFT.
The combination to connect to the SKR and configure in TFT does not work.
Hi, I 've got a problem on one CoreXY (BLV Cube) .. I have SKR 1.4 + 5x TMC2209 + TFT35 V2.0 with last firmware installed. I have BigTree Smart Filament Runout sensor installed. It was configured in TFT config file .
Sensor does not seem to work .
It's connected and configured in Marlin to use XMAX