32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
On Klipper, connect servo to probe port, never 0 and 180 degrees. Only 40 with 0.001 time and 140 with 0.002 time. Could be wrong time due duty cycle ? Or what ?
On Klipper, connect servo to probe port, never 0 and 180 degrees. Only 40 with 0.001 time and 140 with 0.002 time. Could be wrong time due duty cycle ? Or what ?