search

bigtreetech / BIGTREETECH-SKR-V1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required
1.01k stars 1.15k forks source link

Let's talk about E0 #94

Open Ph0rkoz opened 5 years ago

Ph0rkoz commented 5 years ago

I have LV8729 drivers and E0 doesn't move. The board boots up in reset and stays there until I remove the driver.

Rumblings in forums say its due to something the the SKR 1.3 bootloader. Is there a fix I can flash with jtag? There has been all this talk but never a fix.

zebolc commented 5 years ago

Do you have enabled Linear advance?

Ph0rkoz commented 5 years ago

no, its not a configuration issue!

Ph0rkoz commented 4 years ago

Ok, finally I think there is a fix. Thanks to helpful people out there: https://github.com/Arksine/LPC17xx-DFU-Bootloader/releases/tag/0.4.1

Kraken3d commented 4 years ago

Ok, finally I think there is a fix. Thanks to helpful people out there: https://github.com/Arksine/LPC17xx-DFU-Bootloader/releases/tag/0.4.1

I have the SKR 1.4 Turbo and when swapping the TMC 2209 to the LV8729 I get zero movement. What did you have to do to get it working or were you able to?