Open JPCossu opened 4 years ago
I have an Ender 3 - and just upgraded with a BTT SKR-mini E3 V2.0 plus, I also bought a Creality BLTouch V3.1. I used the most updated firmware from BTT/GITHub - firmware-bltouch.bin. My BLTouch, on startup turns red, deploys the probe 2 x and then stays red. On LCD I can see the addition of the BLTouch, but when I have it selftest, deploy and stow nothing happens. I am using the BLTouch supplied "Pinboard A" to attach to the SKR as per the instructions with it and I still can't get the BLtouch to work as advertised. I am new to this hobby and for now I would like to use the available firmware instead of compiling my own. Any help or ideas would be appreciated.
hello friends I have BLTOUCH with 5 pins connector. Installed it on the default dedicated port for BLTOUCH that exists on the skr mini v2 board. I cant seem to make BLTOUCH work. When i put a ZOFFSET to what ever value... the nozzle stays about 2 mm above the bed. When i set it to auto home... it uses the Z, X and Y microswitch. It is behaving like it does not have BLtouch, although i have installed the firmware. Do i need to remove the Z endstop? What i m doing wrong? Is there a guide for BLTOUCH (5 pins connector) and firmaware-bltouch.bin file?
I m searching all over internet, with no luck. Can anyone help me?
Thank you
Hi it’s not you it’s the recompiled firmware it’s incorrect here are the older btt version that work https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/d5fc619c2a4aadc889c47680af351310f521e850/firmware/V2.0
Thank you very much for your email. I had lost the email for quite some time, now I can try again.
Thanks again John
On Wed, Aug 3, 2022 at 2:33 PM Jake @.***> wrote:
Hi it’s not you it’s the recompiled firmware it’s incorrect here are the older btt version that work https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/d5fc619c2a4aadc889c47680af351310f521e850/firmware/V2.0
— Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/283#issuecomment-1204453838, or unsubscribe https://github.com/notifications/unsubscribe-auth/AS5UX3VBF5HUHFAPTAC3JSLVXLJTLANCNFSM4N4AH76A . You are receiving this because you commented.Message ID: @.***>
Hello everyone, is this released firmware up and running? I just received the V2 and I don't want any more problems like with the v1.2.
Thanks and take care
https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/firmware/V2.0/firmware-bltouch-for-z-homing.bin