search

bigtreetech / BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
1.99k stars 1.98k forks source link

[BUG] no screw hole in SKR mini E3 v2.0 CAD model #353

Open riaqn opened 4 years ago

riaqn commented 4 years ago

The 3d model file provided for SKR mini E3 v2.0 does not contain screw holes. On the other hand, the size pdf file contains the distance between holes, but nothing about the hole size, nor the distance from the hole to the edges.

GRASBOCK commented 4 years ago

bump

riaqn commented 4 years ago

In case any one needs it, I made the hole punched STEP here.

NOTE: the size pdf file provided by this repo seems to be not complete and wrong in several measurements. I therefore used the size pdf file provided by Creality for their stock motherboard, which should be (size-wise) compatible with this board.

BTT SKR MINI E3 V2.0 v3.step.gz

latonita commented 4 years ago

+1. downloaded 3d model just to insert it to fusion assembly and make holder.... no screw holes... 👎 👎 👎

riaqn commented 4 years ago

@latonita @GRASBOCK Could you try the file I provided above and let us know if it's precise?

kifantidis commented 3 years ago

Hello @riaqn . I have downloaded your file but according to size description file of skr mini e3 v2.0 provided in BTT github you have not the exact same dimensions. But it's looking kinda decent. I'm doing the holes atm just like the BTT file and I'll upload a repo later.

riaqn commented 3 years ago

@kifantidis As I pointed out above, NOTE: the size pdf file provided by this repo seems to be not complete and wrong in several measurements.

So I suggest you not waste time doing that.

kifantidis commented 3 years ago

@riaqn thank you for the quick response. I've read again your comment above. I didn't read it properly last time.

Regards, Kostas.

ianfights commented 8 months ago

There are also no screw holes in the V3 step file as well, however I managed to find this which has the correct screw holes and the V3's heatsink