search

bigtreetech / BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
2.01k stars 1.97k forks source link

Ender 5 Pro-SKR MINI E3 V2.0 Z-Azis Flipped #356

Open Avery422 opened 4 years ago

Avery422 commented 4 years ago

I replaced the silent board on my ender 5 with a SKR MINI E3 V2.0 and a TFT 35 V3.0. I installed the firmware from (https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/firmware/V2.0/firmware-ender5.bin) the axis goes the wrong way until crashing into the control box. The x and y are okay.

Steps to reproduce

  1. Install the firmware from https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/firmware/V2.0/firmware-ender5.bin

Expected behavior As part of auto-homing the bed is supposed to go down a bit then up until the Z stop switch activates

Actual behavior

  1. Bed goes down until it hits the control box

    Additional Information

    • Include a ZIP file containing your Configuration.h or use Pastebin and paste a link in this issue.
    • Provide pictures or links to videos that clearly demonstrate the issue.
MadMathWizard commented 4 years ago

I will add, that I have this exact same issue.

Avery422 commented 4 years ago

Here is what I use. Works for my Ender 5. I also have linear advance enabled but not active (set to 0) by default firmware-srmod (1).zip

Birdy74 commented 4 years ago

Here is what I use. Works for my Ender 5. I also have linear advance enabled but not active (set to 0) by default firmware-srmod (1).zip

Does not work for me. No BLTouch option in menu either now...

DrDMo commented 4 years ago

Here is what I use. Works for my Ender 5. I also have linear advance enabled but not active (set to 0) by default firmware-srmod (1).zip

Avery422 - May I please have the Configuration file(s) for this bin? I've been struggling with this for weeks and your bin file is the only one I can get to work, but I would like to add my BLTouch to it! Thanks!!

Avery422 commented 4 years ago

Hey I have a new one that has a bl touch skr mini e3 v2 and tft 35

On Sun, Sep 13, 2020 at 10:08 PM DrDMo notifications@github.com wrote:

Here is what I use. Works for my Ender 5. I also have linear advance enabled but not active (set to 0) by default

firmware-srmod (1).zip https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/files/5062628/firmware-srmod.1.zip

Avery422 - May I please have the Configuration file(s) for this bin? I've been struggling with this for weeks and your bin file is the only one I can get to work, but I would like to add my BLTouch to it! Thanks!!

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/356#issuecomment-691770606, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQRU6HYI76ODFD3XSNDHSDDSFV3I5ANCNFSM4PZFMZYQ .

Avery422 commented 4 years ago

Would that work

On Sun, Sep 13, 2020 at 10:10 PM avery sizemore avery.h.sizemore@gmail.com wrote:

Hey I have a new one that has a bl touch skr mini e3 v2 and tft 35

On Sun, Sep 13, 2020 at 10:08 PM DrDMo notifications@github.com wrote:

Here is what I use. Works for my Ender 5. I also have linear advance enabled but not active (set to 0) by default

firmware-srmod (1).zip https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/files/5062628/firmware-srmod.1.zip

Avery422 - May I please have the Configuration file(s) for this bin? I've been struggling with this for weeks and your bin file is the only one I can get to work, but I would like to add my BLTouch to it! Thanks!!

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/356#issuecomment-691770606, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQRU6HYI76ODFD3XSNDHSDDSFV3I5ANCNFSM4PZFMZYQ .

DrDMo commented 4 years ago

Would that work On Sun, Sep 13, 2020 at 10:10 PM avery sizemore avery.h.sizemore@gmail.com wrote: … Hey I have a new one that has a bl touch skr mini e3 v2 and tft 35 On Sun, Sep 13, 2020 at 10:08 PM DrDMo @.***> wrote: > > > > > Here is what I use. Works for my Ender 5. I also have linear advance > enabled but not active (set to 0) by default > > > firmware-srmod (1).zip > https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/files/5062628/firmware-srmod.1.zip > > > > > Avery422 - May I please have the Configuration file(s) for this bin? I've > been struggling with this for weeks and your bin file is the only one I can > get to work, but I would like to add my BLTouch to it! Thanks!! > > > > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#356 (comment)>, > or unsubscribe > https://github.com/notifications/unsubscribe-auth/AQRU6HYI76ODFD3XSNDHSDDSFV3I5ANCNFSM4PZFMZYQ > . > > >

Yes, I suppose. I was hoping to get the Configuration.h and other files so I could make my own changes on some other stuff, but I'll take what I can get, thanks.

DrDMo commented 4 years ago

Just for clarity: I'm using an Ender 5 Pro and the example delivered with the latest Marlin does not work at all - it's a mess, actually. Do you think I should switch over to the Ender 5 code and give it a go? That's what you're using, right?

Avery422 commented 4 years ago

That was not my own firmware. I found it somewhere and was just saying that was what I was using. I have one that uses a bl touch, with skr mini e3 v2.0, and tft 35 e3 v3.0. Firmware Files.zip

Avery422 commented 4 years ago

This is what I use. I dont have the config.h files anymore but I can see if I can find them. I use this with an ender 5 pro with a bl touch, with skr mini e3 v2.0, and tft 35 e3 v3.0. I would stick with the code in the comment above and see if that works on your machine.

Avery422 commented 4 years ago

If you need more clarifications with the steps of uploading the new firmware or any questions, I will try to get back to you as soon as possible.

DrDMo commented 4 years ago

If you need more clarifications with the steps of uploading the new firmware or any questions, I will try to get back to you as soon as possible.

Ah, copy that. Thank you so much for this - I'm back in business!

Avery422 commented 4 years ago

Good to hear, Glad I could Help.

StellasDad commented 3 years ago

I read the comments, but I'm a tad confused (newbie). I'm also looking for E5Pro firmware for the SKR E3 Mini v2 with BL Touch. Can someone please guide me to the right one?