search

bigtreetech / BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
2.01k stars 1.97k forks source link

[BUG] (short description) #365

Open electricianbible opened 4 years ago

electricianbible commented 4 years ago

Description

I am trying to install this board (BIGTREETECH SKR Mini E3 V2.0) with BIGTREETECH Direct BTT TFT43 V3.0 Display Screen on my ender 3 v2.

This is my configuration files. when try to pre heat pla and bed get this error

Heating Failed: E1 Printer halted Please reset

Also try the BIGTREETECH firmware files and won’t work same error. Any help would be really appreciated.

My Configurations Configuration.h https://drive.google.com/file/d/1mzNn8rFFu126a-psCAQTmuaL2_EncWAe/view?usp=sharing Configuration_adv.h https://drive.google.com/file/d/13GXvZy4t8r_c8DJOfwwtiE0glVNOopKx/view?usp=sharing

Steps to Reproduce install BIGTREETECH firmware try to preheat main > temperature >preheat pla not change in temperature not voltage is going to the bed or the hotend.

NOTE:THIS IS IN A ENDER-3 V2

brew99 commented 4 years ago

Check all your heating and thermistor connections to the board. Make sure they are in the correct place. Do you have a voltmeter to check if voltage is getting to the E1 connection when activated?

electricianbible commented 4 years ago

well if i put back the original ender 3 v2 board everything is working fine. there is not voltage coming out off neater hotend or bed if i heat any of the thermistors the display show variation on the readings. what makes me believe that there are doing their function. the only thing that i think I have the problem is on the buck converter for the fans. I got 3 of them.