search

bigtreetech / BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.
2.01k stars 1.97k forks source link

TMC Connection Error #37

Open teoyh opened 5 years ago

teoyh commented 5 years ago

Anybody can advise me how to solve this problem

I have an Ender 3 and i just purchase this new board BTT SKR MINI E3 V1.2. I downloaded the firmware from here https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware firmware.bin and save to the TF card. Insert the card to the printer and power off and on to install the firmware (Is this the correct way ?) Thereafter i get this error TMC Connection Error. I had also tried using the firmware from here https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x

I am using vscode + platformio to compile my firmware , i issue i encounter when doing the compilation is i could not find a right name for the env_default = BIGTREE_SKR_MINI

When i use BIGTREE_SKR_MINI it always throw me error say name is not valid.

Can some one point me to the correct direction to solve this problem

Sorry if this is not the right channel to post

ManiRX100 commented 5 years ago

Hi The issue was solved with the latest firmware by BTT. Check #32 .