Will SKR mini E3 support Ender 3 V2?

bigtreetech / BIGTREETECH-SKR-mini-E3

BIGTREETECH SKR-mini-E3 motherboard is a ultra-quiet, low-power, high-quality 3D printing machine control board. It is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

1.99k stars 1.98k forks source link

Will SKR mini E3 support Ender 3 V2? #424

Open HYC23 opened 3 years ago

HYC23 commented 3 years ago

I recently got an Ender 3 V2, but one of the stepper motor drivers on the motherboard is broken. I have an old ender 3 running SKR mini E3 board and works pretty well, so is the new SKR mini E3 V2 board support the new Ender 3 V2 printer, eg. the screen?

NathanBerglas commented 2 years ago

Remember, you need to flash not only the motherboard, but also the LCD display! if Marlin loads, but all the icons are missing, then you have this problem. You need to take a FAT32, 4096 sector size formatted SD card to flash the LCD. You need to remove all the files from it, and put only a file called DWIN_SET. For the Ender 3 V2 and this setup, the DWIN_SET file you need to use can be found here. Turn off the printer, undo the back of the LCD display, put the SD card into the slot and turn it back on. The screen should turn blue for a few seconds, then turn orange. Once orange, wait 30 to 60 seconds before turning off the printer and taking out the SD card. After this is done, then all of your icons should appear and Marlin is set up correctly.

P.S This only applies to DWIN-style LCD's! If you have the more recent DACAI display, then you should use the private file instead of the DWIN_SET

LoganAllen21 commented 1 year ago

I was able to get the screen working but it dosent register when I turn the know left and right only clicking it what what did I mess up.

jottr commented 11 months ago

How do people get the idea that it is cool to inject a comment in a random language into an English speaking thread? Please use Google translate and post in English for God's sake.

Greetings from Germany.

PeterPavlik27 commented 10 months ago

Hello, can someone please help me? I put a new SKR mini E3 V3.0 board on the ender 3 in 2 I put the firmware in the printer and the desktop, I changed the cable to the DWIN screen, but when I turn on the printer, the screen is black and there are no icons.

herthd commented 5 months ago

Hello, can someone please help me? I put a new SKR mini E3 V3.0 board on the ender 3 in 2 I put the firmware in the printer and the desktop, I changed the cable to the DWIN screen, but when I turn on the printer, the screen is black and there are no icons.

haxmanster commented 5 months ago