Open JohnWish01 opened 3 years ago
+1
Change fan0 vs. fan1
What is your config? I took mine from https://github.com/MarlinFirmware/Configurations/tree/import-2.0.x/config/examples/Creality/Ender-3%20Pro/BigTreeTech%20SKR%20Mini%20E3%202.0, added HOMING_FEEDRATE_Z, compiled with bugfix 2.0.7.2, went fine.
Needed to flash software on the screen also, all errors went away, BLTOUCH was another story, Finally made it through a video guide on youtube, I'd recommend adding a manual somewhere in the GitHub repo 'case it's the first result that comes online on google when searching the product.
Hi There,
I've installed the skr e3 mini v2.0 on my ender 3 pro (with Touch-mi probe), and i get many issue ( fan 0 always ON even with the bugfix version, Alarm and reboots...No printer attached......)
I tried to compile my own as I usually do... but nothing change, i can't use my printer since I installed this motherboard... I've tried marlin bugfix 2.0.0x, 2.0.6.1, 2.0.7.2,........... Hours of compilations and nothing change Could you please Help me to get a good Firmware and get my printer works ? :)
I get lost...
My config is ; Ender 3 pro - SKR E3 MINI V2.0 - TFT35 V3.0 - TOUCH-MI (hotends.fr)
Thanks for you suggestions ;)